Tasman Bridge
Tasman Bridge | |
---|---|
File:Tasman Bridge Dusk.jpg | |
Coordinates | Lua error in package.lua at line 80: module 'strict' not found. |
Carries | Tasman Highway |
Crosses | Derwent River, Southern rail line |
Locale | Hobart, Tasmania |
Maintained by | Department of Infrastructure, Energy and Resources |
Characteristics | |
Design | Prestressed concrete Girder |
Total length | 1,395 metres (4,576 ft) |
Width | 17.5 metres (57'-2 ft) |
Height | 60.5 metres(197 ft) |
Clearance below | 46 metres (150 ft) |
History | |
Construction begin | May 1960[1] |
Construction end | 23 December 1964 |
Statistics | |
Daily traffic | 67,000[2][3] |
The Tasman Bridge is a five-lane bridge crossing the Derwent River, near the CBD of Hobart, Tasmania. The bridge has a total length (including approaches) of 1,396 metres (4,576 ft). As part of the Tasman Highway, it provides the main traffic route from the CBD (on the western shore) to the eastern shore. It has a pedestrian foot way on each side, but no dedicated lane for bicycles. However, steps to the pedestrian foot way have recently been replaced with on-ramps.[4]
Contents
History
In the 1950s with the development of the Eastern shore, it was decided to build a larger bridge; the old Hobart Bridge faced increasing difficulty in managing the larger volumes of traffic that came with development, and constantly raising the lift span for shipping was disruptive. The total cost of the new bridge in conjunction with approach ramps and Lindisfarne Interchange was in the area of £7 million.[5] Construction commenced in May 1960 and the bridge was first opened to traffic (2 lanes only) on 18 August 1964. The bridge was completed with all four lanes operational on 23 December 1964. It was officially opened on 18 March 1965 by Prince Henry, Duke of Gloucester. During peak construction a labour force of over 400 men was employed on site.[5]
Disaster
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
On Sunday 5 January 1975, at 9:27 p.m. Australian Eastern Summer Time, the Tasman Bridge was struck by the bulk ore carrier Lake Illawarra,[1] bound for the Electrolytic Zinc Company with a cargo of 10,000 tons of zinc concentrate.[1] It caused two pylons and three sections of concrete decking, totaling 127 metres (417 ft), to fall from the bridge and sink the ship. Seven of the ship's crewmen were killed, and five motorists died when four cars drove over the collapsed sections before the traffic was stopped. A major press shot showed a Holden Monaro HQ GTS, which was owned by Frank and Sylvia Manley, along with an older EK Holden station wagon, driven by a local man Mr. Murray Ling, perched balancing on the ledge.[6]
The depth of the river at this point (35 metres (115 ft) is such that the wreck of Lake Illawarra still lies on the bottom, with concrete slab on top of it, without presenting a navigation hazard to smaller vessels.
The breakage of an important arterial link isolated the residents in Hobart’s eastern suburbs – the relatively short drive across the Tasman Bridge to the city suddenly became a 50 kilometre (31 mi) journey via the estuary's next bridge at Bridgewater. The only other vehicular crossing within Hobart after the bridge collapsed was the Risdon Punt, a cable ferry which crossed the river from East Risdon and Risdon, some five kilometres upstream from the bridge. However, it was totally inadequate, carrying only eight cars on each crossing, and although ferries provided a service across the Derwent River, it was not until December 1975 that a two lane, 788m long Bailey bridge was opened to traffic, thereby restoring some connectivity.
The separation of Hobart saw an immediate surge in the small and limited ferry service then operating across the river.[1] In a primary position to provide a service were the two ships of Robert Clifford, a Tasmanian mariner[citation needed]. He had introduced the locally-built ferries Matthew Brady and James McCabe to the river crossing, from the Central Business District of Hobart to the eastern shore, shortly before the collision. These two ships were soon joined by the Cartela, a wooden vessel of 1912 vintage, and other ships, including Sydney Harbour ferries, pressed into service by the Tasmanian Government, to ferry thousands of commuters across the river[citation needed].
Following successful rebuilding of the Bridge, Clifford's organisation saw the ferry traffic fade quickly, but by then he had diversified into further building of ships.[citation needed].
On 20 June 2007, a crane toppled whilst carrying out works on the bridge, and precariously hung for a number of hours off the side of the barriers.[7]
Reconstruction
Reconstruction of the Tasman Bridge commenced in October 1975. An important factor of the reconstruction is the improved safety measures. Some examples:
- Large vessels passing beneath the bridge must now do so slightly to the west of the original main navigation span.
- Personnel controlling ships (or harbor pilots) must be trained and then cleared for using the special laser lighthouse that indicates by colours whether the ship must be steered left or right to regain the centre line.
- All road traffic is now halted whilst large vessels transit beneath the bridge.
On top of the new safety measures implemented, the bridge was further upgraded to hold a fifth lane.[1][8] This upgrade included the construction of a lane management system which would enable the new middle lane to function as a reversible lane. The system consists of a traffic light system and a sign above each lane, pictured right. The signs, in conjunction with the traffic light system, employ a pulley system to periodically pull the signs over their appropriate lanes.
The middle lane points towards the city side (or western shore) during a.m. peak hours and points back towards the eastern shore during p.m. peak hours. The lane generally points towards the eastern shore during non-peak hours.
The Tasman Bridge repair took two years and cost approximately $44 million.[8] The bridge officially reopened on 8 October 1977.[1][8]
Replacement
In 2010, Clarence Alderman Richard James stated that it was time to consider the replacement of the Tasman Bridge with a new bridge of suspension or cable stay design citing that the current bridge was facing a greatly reduced lifespan due to damage to the internal steel structure caused by the Tasman Bridge disaster. Richard James has suggested a timeframe of no more than 20 years.[9]
Gallery
-
Tasman-under-from-east-shore.jpg
View of the bridge from the eastern shore.
-
Tasman-bridge-from-south.jpg
Looking towards the Tasman Bridge from Montagu Bay.
-
NS14TasmanBridge.JPG
Dinghy and the bridge.
-
Tasman-bridge-fixed-span.jpg
The repaired bridge span
-
Tasman Bridge Hobart1.jpg
The view of the Bridge from Mount Wellington
-
Derwent River 013.jpg
A view of the bridge from the river
See also
References
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 8.0 8.1 8.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ http://www.themercury.com.au/article/2010/12/17/193921_tasmania-news.html
Lua error in package.lua at line 80: module 'strict' not found.
- Reference: Lewis, Tom. By Derwent Divided. Darwin: Tall Stories, 1999.
- Ludeke, M. (2006) Ten Events Shaping Tasmania's History. Hobart: Ludeke Publishing.
External links
Wikimedia Commons has media related to [[commons:Lua error in Module:WikidataIB at line 506: attempt to index field 'wikibase' (a nil value).|Lua error in Module:WikidataIB at line 506: attempt to index field 'wikibase' (a nil value).]]. |
- Live webcam view of Hobart including the Tasman Bridge
- Traffic camera view of the Tasman Bridge
- Archival photographs of construction of the Tasman Bridge: page 1, page 2.
- 1995 article about Tasman Bridge safety
- Hobart To Tasman Bridge 1938-2000
- Tasman Bridge at StructuraeLua error in Module:WikidataCheck at line 28: attempt to index field 'wikibase' (a nil value).
- Pages with broken file links
- Use dmy dates from January 2013
- Pages using deprecated coordinates format
- Articles with unsourced statements from February 2008
- Commons category link from Wikidata
- Bridges in Hobart
- Bridges completed in 1964
- Bridges completed in 1977
- Landmarks in Hobart
- Roads with a reversible lane