RwandAir Flight 205

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
RwandAir Flight 205
Brit.air.crj-100.f-grjj.arp.jpg
A CRJ-100 similar to the accident aircraft
Accident summary
Date 12 November 2009
Summary Ground collision with terminal
Site Kigali International Airport, Kigali, Rwanda
Passengers 10
Crew 5
Injuries (non-fatal) 10 (on aircraft and in VIP terminal)
Fatalities 1
Survivors 14
Aircraft type Canadair CRJ-100
Operator JetLink Express
Registration 5Y-JLD
Flight origin Kigali International Airport, Kigali, Rwanda
Destination Entebbe International Airport, Entebbe, Uganda

RwandAir Flight 205 was a Canadair CRJ-100 that crashed into the Terminal Building after an emergency landing at Kigali, Rwanda killing one passenger.[1] The flight was operated by JetLink Express on behalf of RwandAir. In the aftermath of the accident, RwandAir suspended all operations with JetLink Express.

Accident

The flight took off from Kigali International Airport where shortly after the pilots informed air traffic control that the Left Thrust lever had become jammed at the Takeoff Power setting. The pilots did not utilize the Thrust Lever Jammed Abnormal Checklist Procedure and instead immediately returned to the airport with the Right Thrust Lever (which was adjustable) at idle, landing shortly after 11:30am. The aircraft stopped short of the VIP Terminal Building, but lurched forward as the chocks were being put in place; the aircraft then crashed into the VIP terminal.[2] A fire followed the accident but was put out. The co-pilot was eventually freed from the wreckage three hours after the crash.[3] Of the 10 passengers and 5 crew, all survived the initial crash with injuries to 10 people on the aircraft and in the VIP terminal. One female passenger died shortly after arriving at a hospital.[4]

A RwandAir spokesperson said, "He landed safely on the runway and was guided by the marshals into the parking area. For some unexplained reason, the plane, from the parking spot, took off again at full power and ... took a right turn, unexplained, into the technical building."[5] The METAR in force at the time of the accident was HRYR 121030Z VRB03KT 9999 BKN030 24/18 Q1018 NOSIG=.[6]

Aftermath

Post-flight investigation revealed the cable connecting the Left Thrust Lever to the engine assembly had severed shortly after application of Takeoff power. A procedure in the aircraft's Quick Reference Handbook (QRH) titled "Thrust Lever Jammed" would have directed the pilots to shut down the left engine by utilizing the Left Engine Fire push switch, which would have closed (among other things) the Fuel SOV (shutoff valve), thus allowing the speed of the aircraft to be better controlled while landing the aircraft. This QRH procedure would have been accomplished "at a safe altitude" per the procedure, while giving consideration to terrain or other obstacles. The pilots did not perform the above procedure, and instead, chose to immediately return to the airport, landing at a higher than normal airspeed due to the left engine still producing takeoff thrust, making it difficult to stop the aircraft and using much greater runway distance than normal. The aircraft was taxied back to the Terminal with the left engine still producing takeoff power and the right engine at idle. When the aircraft was brought to a stop at the Terminal building, the right engine was shutdown by the pilots, the left engine was still operating at takeoff thrust, and the hydraulics were all turned "off", which was common procedure at the time. The aircraft disc brakes on the Canadair CRJ-100 are operated by 2 of the 3 hydraulic systems on the aircraft, with System 2 supplied by pumps on the right engine (both mechanical and electric) and System 3 being supplied by two electric pumps. By shutting off the right engine and all of the electric hydraulic systems, the brakes as well as the parking brake were no longer being powered. As the hydraulic pressure bled down and with the left engine still producing takeoff thrust, the aircraft jumped over the chocks, lurched to the right (caused by the left engine thrust), and hit the Terminal building.[7] The left engine was eventually shutdown by the airport crash tender spraying foam into the engine.

Aircraft

The aircraft involved was a Canadair CRJ-100, registration 5Y-JLD, which first flew in 1997.[8]

References

  1. RwandAir flight crashes into VIP terminal killing 1 and injuring 10
  2. [1]
  3. Co-pilot stuck in wreckage for 3 hours
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. RwandAir spokesperson
  6. Translation of METAR: METAR for Kigali Airport, issued on the 12th of the month at 10:30 UTC. Wind variable at 3 knots, unlimited visibility, broken clouds at 3000 feet, temperature 24°C, dewpoint 18°C, QNH 1018 hPa, no significant changes expected, end of METAR report.
  7. RwandAir Jet Crashes into VIP Terminal in Kigali and Kills One Passenger
  8. RwandAir Flight 205 at Aviation-Safety