Metropolitan Railway G Class

Metropolitan Railway G Class
LNER Class M2

Type and origin Power type Steam Designer Charles Jones Builder Yorkshire Engine Company Build date 1915

Specifications Configuration 0-6-4T Gauge 4 ft 8 1⁄2 in (1,435 mm) standard gauge Driver diameter 5 ft 9 in (1.753 m) Trailing dia 3 ft 6 in (1.067 m) Wheelbase 28 ft 9 in (8.763 m) Axle load 18.65 long tons (18.95 t; 20.89 short tons) Loco weight 71.05 long tons (72.19 t; 79.58 short tons) Fuel type Coal Fuel capacity 4.5 long tons (4.6 t; 5.0 short tons) Water cap 2,000 imp gal (9,100 L; 2,400 US gal) Boiler pressure 160 psi (1.1 MPa) Firegrate area 21.4 sq ft (1.99 m2) Heating surface:  • Tubes 281 sq ft (26.1 m2)  • Flues 281 sq ft (26.1 m2)  • Firebox 142 sq ft (13.2 m2) Superheater:  • Heating area 197 sq ft (18.3 m2) Cylinders 2 (inside) Cylinder size 20 in × 26 in (508 mm × 660 mm) Valve gear Stephenson

Performance figures Tractive effort 20,498 lbf (91.18 kN) (at 85% pressure)

Career Operators Metropolitan Railway London and North Eastern Railway Number in class 4 Retired 1943–1948 Disposition All scrapped

The Metropolitan Railway G Class consisted of four 0-6-4T steam locomotives, numbered 94 to 97. They were built by Yorkshire Engine Company in 1915. The class was unusual in carrying names as well as numbers, and were the last Metropolitan steam locomotives to do so.

Service

The G Class were used on various duties on the Metropolitan Railway mainline until 1937 when all four were transferred to the LNER. The LNER numbered them 6154–6157 and classified them as M2 Class. Two survived to the 1946 renumbering.

Withdrawal

All were withdrawn and scrapped between 1943 and 1948.

Names and numbers

Table of names and numbers

Number	Name	LNER No.	1946 No.	Withdrawn
94	Lord Aberconway	6154	Allocated No. 9075, but withdrawn before re-numbering	1946
95	Robert H. Selbie	6155	9076	1948
96	Charles Jones	6156	9077	1948
97	Brill	6157		1943

External links

• http://www.lner.info/locos/M/m2.shtml