Dimethylmercury

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Dimethylmercury
Skeletal formula of dimethylmercury with all hydrogens added
Spacefill model of dimethylmercury
Names
IUPAC name
Dimethylmercury[1]
Identifiers
593-74-8 N
3600205
ChEBI CHEBI:30786 YesY
ChemSpider 11155 YesY
EC Number 209-805-3
25889
Jmol 3D model Interactive image
MeSH dimethyl+mercury
PubChem 11645
RTECS number OW3010000
UNII C60TQU15XY YesY
UN number 3383
  • InChI=1S/2CH3.Hg/h2*1H3; YesY
    Key: ATZBPOVXVPIOMR-UHFFFAOYSA-N YesY
  • C[Hg]C
Properties
HgC
2
H
6
Molar mass 230.66 g mol−1
Appearance Colorless liquid
Odor Sweet
Density 2.961 g mL−1
Melting point −43 °C (−45 °F; 230 K)
Boiling point 93 to 94 °C (199 to 201 °F; 366 to 367 K)
1.543
Thermochemistry
57.9–65.7 kJ mol−1
Vapor pressure {{{value}}}
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YesYN ?)
Infobox references

Dimethylmercury ((CH3)2Hg) is an organomercury compound. This colorless liquid is one of the strongest known neurotoxins. It is described as having a slightly sweet smell, although inhaling enough vapor to detect its odor would be hazardous.[2]

Synthesis, structure, reactions

The compound was one of the earliest organometallics reported, reflecting its considerable stability. It is formed by treating sodium amalgam with methyl halides:

Hg + 2 Na + 2 CH3I → Hg(CH3)2 + 2 NaI

It can also be obtained by alkylation of mercuric chloride with methyllithium:

HgCl2 + 2 LiCH3 → Hg(CH3)2 + 2 LiCl

The molecule adopts a linear structure with Hg-C bond lengths of 2.083 Å.[3]

Reactions

The most striking feature of the compound is its nonreactivity toward water, whereas the corresponding organocadmium and organozinc compounds hydrolyze rapidly. The difference reflects the low affinity of Hg(II) for oxygen ligands. The compound reacts with mercuric chloride to give the mixed chloro-methyl compound:

(CH3)2Hg + HgCl2 → 2 CH3HgCl

Whereas dimethylmercury is a volatile liquid, CH3HgCl is a crystalline solid.

Use

Dimethylmercury currently has almost no applications because of the risks involved. As with many methyl-organometallics, it is a methylating agent that can donate its methyl groups to an organic molecule; however, the development of less acutely toxic nucleophiles such as dimethylzinc and trimethylaluminium, and the subsequent introduction of Grignard reagents (organometallic halides), has essentially rendered this compound obsolete in organic chemistry. It was formerly studied for reactions in which the methylmercury cation was bonded to the target molecule, forming potent bactericides; however, the bioaccumulation and ultimate toxicity of methylmercury has largely led it to be abandoned for this purpose in favor of the related ethylmercury cation, which perform a similar function without the bioaccumulation hazard.

In toxicology, it was formerly used as a reference toxin. It has also been used to calibrate NMR instruments for detection of mercury, although less toxic mercury salts are preferred.[4][5][6]

Safety

Dimethylmercury is extremely toxic and dangerous to handle. Absorption of doses as low as 0.1 mL can result in severe mercury poisoning.[7] The risks are enhanced because of the high vapor pressure of the liquid.

Dimethylmercury passes through latex, PVC, butyl, and neoprene within seconds, and is very quickly absorbed through the skin. Due to its chemical nature, it carries with it a high aptitude for its effortless ability to pass through the same safety equipment and barriers that prevent lab accidents such as direct bodily contact (skin; eyes; oral) that have proved to be adequate protection for a majority of laboratory chemical substances.

Therefore, due to its high efficiency in penetrating skin barriers, the most common gloves used in a majority of laboratories and/or clinical settings do not provide adequate protection from dimethylmercury. It's widely understood and accepted that the only safe precaution is to handle dimethylmercury while wearing highly resistant laminated gloves; adding long-cuffed neoprene or other heavy-duty gloves over the first pair. Also indicated when handling this highly dangerous substance, is the consistent use of a long face shield, added to the safety measure of working under a fume hood.[7][8]

Dimethylmercury crosses the blood–brain barrier easily, probably owing to formation of it's ability to intercalinte with the cystine anino acid or by forming complex with cysteine.[9] It is eliminated from the organism slowly, and therefore has a tendency to bioaccumulate. The symptoms of poisoning may be delayed by months, resulting in many cases in which a diagnosis was ultimately discovered, but only at the point in which it is often too late for an effective treatment regimen to be successful.[9]

The toxicity of dimethylmercury was highlighted with the death of the inorganic chemist Karen Wetterhahn of Dartmouth College in 1997. After spilling no more than a few drops of this compound on her latex-glove, the barrier was immediately compromised and within seconds it was absorbed into the back of her hand, quickly circulating and resulting in her death ten months later.[7]

See also

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Lua error in package.lua at line 80: module 'strict' not found.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. 7.0 7.1 7.2 Lua error in package.lua at line 80: module 'strict' not found.
  8. Lua error in package.lua at line 80: module 'strict' not found.
  9. 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.

External links