Cadmium fluoride

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

Cadmium fluoride
Fluorite-unit-cell-3D-ionic.png
Names
IUPAC name
Cadmium fluoride
Other names
Cadmium(II) fluoride, Cadmium difluoride
Identifiers
7790-79-6 YesY
ChemSpider 23036 YesY
EC Number 232-222-0
Jmol 3D model Interactive image
  • InChI=1S/Cd.2FH/h;2*1H/q+2;;/p-2 YesY
    Key: LVEULQCPJDDSLD-UHFFFAOYSA-L YesY
  • InChI=1/Cd.2FH/h;2*1H/q+2;;/p-2
    Key: LVEULQCPJDDSLD-NUQVWONBAG
  • F[Cd]F
Properties
CdF2
Molar mass 150.41 g/mol
Appearance grey or white-grey crystals
Density 6.33 g/cm3, solid
Melting point 1,110 °C (2,030 °F; 1,380 K)
Boiling point 1,748 °C (3,178 °F; 2,021 K)
4.35 g/100 mL
Solubility soluble in acid
insoluble in ethanol alcohol and liquid ammonia
Structure
Fluorite (cubic), cF12
Fm3m, No. 225
Thermochemistry
-167.39 ± 0.23 kcal. mole-1 at 298.15 (K, C?)
-155.4 ± 0.3 kcal. mole-1 at 298.15 (K, C?)
Vapor pressure {{{value}}}
Related compounds
Other anions
Cadmium chloride,
Cadmium bromide
Cadmium iodide
Other cations
Zinc fluoride,
Mercury(II) fluoride,
Copper(II) fluoride,
Silver(II) fluoride,
Calcium fluoride,
Magnesium fluoride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
YesY verify (what is YesYN ?)
Infobox references

Cadmium fluoride (CdF2) is a mostly water-insoluble source of cadmium used in oxygen-sensitive applications, such as the production of metallic alloys. In extremely low concentrations (ppm), this and other fluoride compounds are used in limited medical treatment protocols. Fluoride compounds also have significant uses in synthetic organic chemistry.[1] The standard enthalpy has been found to be -167.39 kcal. mole−1 and the Gibbs energy of formation has been found to be -155.4 kcal. mole−1, and the heat of sublimation was determined to be 76 kcal. mole−1.[2][3]

Preparation

Cadmium fluoride is prepared by the reaction of gaseous fluorine or hydrogen fluoride with cadmium metal or its salts, such as the chloride, oxide, or sulfate.

It may also be obtained by dissolving cadmium carbonate in 40% hydrofluoric acid solution, evaporating the solution and drying in a vacuum at 150 °C.

Another method of preparing it is to mix cadmium chloride and ammonium fluoride solutions, followed by crystallization. The insoluble cadmium fluoride is filtered from solution.[4]

Cadmium fluoride has also been prepared by reacting fluorine with cadmium sulfide. This reaction happens very quickly and forms nearly pure fluoride at much lower temperatures than other reactions used.[5]

Uses

Electronic Conductor

CdF2 can be transformed into an electronic conductor when doped with certain rare earth elements or yttrium and treated with cadmium vapor under high temperature conditions. This process creates blue crystals with varying absorption coefficients depending on the concentrations of the dopant. A proposed mechanism explains that the conductivity of these crystals can be explained by a reaction of Cd atoms with interstitial F ions. This creates more CdF2 molecules and releases electrons which are weakly bonded to trivalent dopant ions resulting in n-type conductivity and a hydrogenic donor level.[6]

Safety

Cadmium fluoride, like all cadmium compounds, is toxic and should be used with care. Fluoride is mildly toxic by comparison.

Cadmium fluoride can cause potential health issues if it is not handled properly. It can cause irritation to the skin and the eyes, so gloves and protective eyewear are advised. The MSDS, or Material Safety Data Sheet, also includes warnings for ingestion and inhalation. Under acidic conditions, at high temperatures, and in moist environments, hydrogen fluoride and cadmium vapors may be released into the air. Inhalation may cause irritation of the respiratory system as well as congestion, fluorosis, and even pulmonary edema in extreme cases. Cadmium fluoride also has the same potential hazards caused by cadmium and fluoride. [7]

See also

Lua error in package.lua at line 80: module 'strict' not found.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Pradyot Patnaik. Handbook of Inorganic Chemicals. McGraw-Hill, 2002, ISBN 0-07-049439-8
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Lua error in package.lua at line 80: module 'strict' not found.
  7. Lua error in package.lua at line 80: module 'strict' not found.

External links


<templatestyles src="Asbox/styles.css"></templatestyles>