Acrylate polymer

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

<templatestyles src="Module:Hatnote/styles.css"></templatestyles>

For other uses, see Acrylic (disambiguation).

Acrylate polymers belong to a group of polymers which could be referred to generally as plastics. They are noted for their transparency, resistance to breakage, and elasticity. They are also commonly known as acrylics or polyacrylates.

Monomers

Acrylic acid
Methylmethacrylate
Acrylonitrile

Acrylate monomers used to form acrylate polymers are based on the structure of acrylic acid, which consists of a vinyl group and a carboxylic acid terminus. Other typical acrylate monomers are derivatives of acrylic acid, such as methyl methacrylate in which one vinyl hydrogen and the carboxylic acid hydrogen are both replaced by methyl groups, and acrylonitrile in which the carboxylic acid group is replaced by the related nitrile group.

Other examples of acrylate monomers are:

Recently, organic−inorganic hybrid nanobuilding blocks of Acrylate-functionalized polyhedral oligomeric silsesquioxanes (T8, T10, and T12) were easily prepared and separated in their pure forms, which are promising candidate monomers to prepare any hybrid polymer nanocomposites.[1]

Acrylic elastomers

Acrylic elastomer is a general term for a type of synthetic rubber whose main component is acrylic acid alkylester (ethyl or butyl ester).[2] Acrylic elastomer has characteristics of heat and oil resistance.

It is divided into old type and new type: Old types include ACM (copolymer of acrylic acid ester and 2-chloroethyl vinyl ether) containing chlorine and ANM (copolymer of acrylic acid ester and acrylonitrile) without chloride. Other than the slightly better water resistance of ANM, there are no physical differences; even processability is poor for both types. Since prices are also high, demand is not so high vis-à-vis the characteristics. On the other hand, the new type of acrylic rubber does not contain any chlorine despite its unclear chemical composition. Processability has been improved, and most of tackiness to rolls as well as staining problems related to molds have been solved.

Major characteristics of acrylic rubber include heat resistance and oil resistance; it can endure a temperature of 170 ~ 180 ℃ under dry heat or in oil. Since it does not have a double bond, acrylic rubber also boasts of good weatherability and ozone resistance.

Its cold resistance is not that good, however. The saturation point is -15 ℃ for the old type and -28 ~ -30 ℃ for the new type. In terms of vulcanization, the standard method for the old type is amine vulcanization. To minimize permanent deformation, the old type requires curing for 24 hours under a temperature of 150 ℃. On the other hand, for the new type, the press curing time and follow-up vulcanization time are significantly reduced by combining metal soap and sulfur. It has no special characteristics. The rebound resilience and abrasion resistance of the new type are poor, and even its electrical characteristics are considerably poor compared with acrylonitrile-butadiene rubber and butyl rubber.

The materials are used mainly for oil seals and packagings related to automobiles.

Other acrylic polymers

References

  1. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ http://www.patentstorm.us/patents/6015860/claims.html

See also

Retrieved from "https://infogalactic.com/w/index.php?title=Acrylate_polymer&oldid=3452807"