866A
| 866A | |
|---|---|
|
Westinghouse 866A mercury vapor half-wave rectifier tube.
|
|
| Classification: | Diode |
| Cathode | |
| Cathode type: | Directly heated |
| Heater voltage: | 2.5 |
| Heater current: | 5 A |
| Anode | |
| Max voltage: | 5000 |
| Max current: | 250 mA |
| References | |
| RCA Transmitting Tube Manual TT-3, 1940 | |
The 866 is a mercury vapor half-wave rectifier intended for high-voltage applications. The voltage drop is approximately 15 volts up to 150 Hz. To avoid unwanted shorts the tube must be operated in a vertical position and the filament preheated for at least 30 seconds before applying the plate voltage.
Construction
Structurally, it consists of a linear electrode arrangement; a cup shaped anode with top cap and a cylindrical cathode. The socket is a medium 4 pin bayonet UX-4 and the glass envelope is ST-19. The 2.5 volt/ 5 Amp filament is connected to pins 1 and 4.
Operation
Under normal operating conditions the tube glows blue and mercury droplets are visible.
Pictures in working conditions
|
References
- Lua error in package.lua at line 80: module 'strict' not found.
External links
- 866A and 872A high-voltage half-wave mercury vapour rectifiers
- 866 @ The National Valve Museum
- 866A at Radiomuseum.org
<templatestyles src="Asbox/styles.css"></templatestyles>
 |
This electronics-related article is a stub. You can help Wikipedia by expanding it. |
