List of Farm to Market Roads in Texas (300–399)
 
Texas Farm to Market Road and Ranch to Market Road markers
|
|
| Highway names | |
|---|---|
| Interstates: | Interstate Highway X (IH-X, I-X) |
| US Routes: | U.S. Highway X (US X) |
| State: | State Highway X (SH X) |
| Loops: | Loop X |
| Spurs: | Spur X |
| Recreational: | Recreational Road X (RE X) |
| Farm or Ranch to Market Roads: |
Farm to Market Road X (FM X) Ranch-to-Market Road X (RM X) |
| Park Roads: | Park Road X (PR X) |
| System links | |
Farm to Market Roads in Texas are owned and maintained by the Texas Department of Transportation (TxDOT).
Contents
- 1 FM 300
- 2 FM 301
- 3 FM 302
- 4 FM 303
- 5 FM 304
- 6 FM 305
- 7 FM 306
- 8 FM 307
- 9 FM 308
- 10 FM 309
- 11 FM 310
- 12 FM 311
- 13 FM 312
- 14 FM 313
- 15 FM 314
- 16 FM 315
- 17 FM 316
- 18 FM 317
- 19 FM 318
- 20 FM 319
- 21 FM 320
- 22 FM 321
- 23 FM 322
- 24 FM 323
- 25 FM 324
- 26 FM 325
- 27 FM 326
- 28 FM 327
- 29 FM 328
- 30 FM 329
- 31 FM 330
- 32 FM 331
- 33 FM 332
- 34 FM 333
- 35 RM 334
- 36 RM 335
- 37 RM 336
- 38 RM 337
- 39 FM 338
- 40 FM 339
- 41 FM 340
- 42 FM 341
- 43 FM 342
- 44 FM 343
- 45 FM 344
- 46 FM 345
- 47 FM 346
- 48 FM 347
- 49 FM 348
- 50 FM 349
- 51 FM 350
- 52 FM 351
- 53 FM 352
- 54 FM 353
- 55 FM 354
- 56 FM 355
- 57 FM 356
- 58 FM 357
- 59 FM 358
- 60 FM 359
- 61 FM 360
- 62 FM 361
- 63 FM 362
- 64 FM 363
- 65 FM 364
- 66 FM 365
- 67 FM 366
- 68 FM 367
- 69 FM 368
- 70 FM 369
- 71 FM 370
- 72 FM 371
- 73 FM 372
- 74 FM 373
- 75 FM 374
- 76 FM 375
- 77 FM 376
- 78 FM 377
- 79 FM 378
- 80 FM 379
- 81 FM 380
- 82 FM 381
- 83 FM 382
- 84 FM 383
- 85 FM 384
- 86 RM 385
- 87 RM 386
- 88 FM 387
- 89 FM 388
- 90 FM 389
- 91 FM 390
- 92 FM 391
- 93 FM 392
- 94 FM 393
- 95 FM 394
- 96 FM 395
- 97 FM 396
- 98 FM 397
- 99 FM 398
- 100 FM 399
- 101 References
FM 300
|
|
|
|---|---|
| Location: | Hockley and Cochran counties |
| Length: | 14.559 mi[1] (23.430 km) |
| Existed: | June 15, 1945[1]–present |
Farm to Market Road 300 is a 14.559-mile-long (23.430 km) route in the Llano Estacado region of Texas.
FM 300 begins at an intersection with FM 1780 south of Whiteface and heads east through open plains. About six miles (9.7 km) east of its western terminus, FM 303 intersects the route from the north and travels concurrent with it for about one mile (1.6 km) before exiting to the south. FM 300 continues east through plains for approximately 5.5 miles (8.9 km) before entering the city of Levelland and curving to the northeast.[2]
As it enters the city, the road becomes known as Clubview Drive. In Levelland, Clubview Drive intersects Avenue H; at this intersection, FM 300 enters from the west on Clubview Drive and exits to the north on Avenue H, while U.S. Route 385 (US 385) enters from the south on Avenue H and exits to the east on Clubview Drive. The FM 300 designation continues north through Levelland on Avenue H for one mile (1.6 km), passing west of a lake before ending at Business State Highway 114-B (Houston Street).[2]
FM 300 was first designated on June 15, 1945. It originally began at Texas State Highway 51 (SH 51) in rural Terry County and went west, then north, passing through Sundown before traveling northwestward to Levellan. On February 24, 1953, the section that connected the route to SH 51 was transferred to FM 211. At the same time, the designation absorbed some of FM 402 and all of FM 847, and was extended southeast through the ghost town of Gomez to US 62. Then, on February 10, 1966, the portion of the route from US 62 to west of Levelland was transferred to FM 303, while all of FM 1634 was transferred to FM 300. These changes brought the route to its current status.[1]
FM 301
|
|
|
|---|---|
| Location: | Hockley and Cochran counties |
| Length: | 16.141 mi[3] (25.976 km) |
| Existed: | June 15, 1945[3]–present |
FM 302
|
|
|
|---|---|
| Location: | Lamb County |
| Length: | 5.007 mi[4] (8.058 km) |
| Existed: | June 11, 1945[4]–present |
FM 303
|
|
|
|---|---|
| Location: | Northwest Texas |
| Length: | 121.249 mi[5] (195.131 km) |
| Existed: | June 11, 1945[5]–present |
FM 304
|
|
|
|---|---|
| Location: | Angelina County |
| Length: | 1.502 mi[6] (2.417 km) |
| Existed: | September 27, 1960[6]–present |
Farm to Market Road 304 is located in Angelina County. It runs from FM 2497 north of Diboll to Pine Valley.
FM 304 was designated on September 27, 1960, on the current route.
FM 304 (1945)
|
|
|
|---|---|
| Location: | Lamb and Hockley counties |
| Length: | 27.2 mi[6] (43.8 km) |
| Existed: | July 14, 1945–October 24, 1958[6] |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
The original FM 304 was designated on July 14, 1945, from FM 54 in Spade north 7 miles to Hart Camp. On January 27, 1948, the road was extended to the Hockley County line. On December 16, 1948 the road was extended north of Hart Camp 6.1 miles. On July 14, 1949, the road was extended to Spur 9 in Olton. On May 23, 1951, the road was extended to US 84 in Anton. The final change was on July 1, 1955, when FM 304 was extended to US 70 in Olton, replacing Spur 9. FM 304 was cancelled on October 31, 1958 and transferred to FM 168, although this did not take effect until 1959.
FM 305
|
|
|
|---|---|
| Location: | Upton, Crockett and Pecos counties |
| Length: | 19.659 mi[7] (31.638 km) |
| Existed: | July 9, 1945[7]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Farm to Market Road 305 is located in Upton, Crockett, and Pecos counties. It runs from US 67 in McCamey to US 190.
FM 305 was designated on July 9, 1945 from US 290, 12 miles east of Bakersfield, to the Pecos River. On June 28, 1945 the road was extended north to the Upton County line. On August 28, 1949 the road was extended northwest to US 67 at McCamey. The final change was on December 15, 1977 when the section from US 290 to FM 1257 was transferred to US 190.
FM 306
|
|
|
|---|---|
| Location: | Comal County |
| Length: | 31.612 mi[8] (50.875 km) |
| Existed: | May 23, 1951[8]–present |
FM 306 (1945)
|
|
|
|---|---|
| Location: | Midland County |
| Existed: | June 11, 1945–April 30, 1947[8] |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
The original FM 306 was designated on June 11, 1945, from US 80 (now I-20) in Midland north to the Martin County line. FM 306 was cancelled on April 30, 1947 and became a portion of SH 349.
FM 307
|
|
|
|---|---|
| Location: | Midland County |
| Length: | 17.163 mi[9] (27.621 km) |
| Existed: | June 11, 1945[9]–present |
Farm to Market Road 307 is located in Midland County. It runs from I-20 to SH 137.
FM 307 was designated on June 11, 1945 from SH 158 east of Midland east 14.1 miles. On July 14, 1949 the road was extended east 4.1 miles to a road intersection. On April 23, 1990 the road was rerouted to run from Lamesa Road in Midland east to SH 137. The final change was on June 30, 1995 when the section from Lamesa Road to I-20 was transferred to UR 307.
FM 308
|
|
|
|---|---|
| Location: | McLennan, Hill and Ellis counties |
| Length: | 51.188 mi[10] (82.379 km) |
| Existed: | June 18, 1945[10]–present |
Farm to Market Road 308 is located in McLennan, Hill, and Ellis counties. It runs from I-35 to US 77 in Milford, and then from US 77 northeast of Milford to FM 66 south of Maypearl, with a spur connection in Birome. There is a concurrency with US 77.
FM 308 was designated on June 18, 1945 from Mertens to Irene. On January 26, 1948 the road was extended to SH 22, replacing Spur 56. On January 25, 1948 the road was extended to US 81 (now I-35) in Elm Mott, replacing FM 311 and FM 435. On January 18, 1952 a spur connection to Birome was added. On June 24, 1952 a spur connection to Irene was added, replacing Spur 193. On November 19, 1953 the road was extended north to US 77 in Milford, replacing FM 1882. On November 1, 1956, the road was rerouted in Mertens; the old route was transferred to Spur 314. On April 1, 1958 the road was extended from US 77 to a road intersection, replacing FM 1386 and creating a concurrency with US 77. On September 27, 1960 the road was extended northwest to FM 66. On January 15, 1976 the road was extended southwest to FM 933. On November 14, 1980 the spur connection to Irene was transferred to FM 1604. The final change was on June 30, 1995 when the section from UR 933 to I-35, along with a spur connection, was transferred to UR 308.
FM 309
|
|
|
|---|---|
| Location: | Hill County |
| Length: | 12.141 mi[11] (19.539 km) |
| Existed: | June 18, 1945[11]–present |
FM 310
|
|
|
|---|---|
| Location: | Hill County |
| Length: | 9.439 mi[12] (15.191 km) |
| Existed: | July 3, 1945[12]–present |
FM 311
|
|
|
|---|---|
| Location: | Comal County |
| Length: | 7.940 mi[13] (12.778 km) |
| Existed: | May 23, 1951[13]–present |
FM 311 (1945)
|
|
|
|---|---|
| Location: | Hill County |
| Existed: | June 18, 1945–November 23, 1948[13] |
The original FM 311 was designated on June 18, 1945 from Malone to Birome in Hill County. FM 311 was cancelled on November 23, 1948 and became a portion of FM 308.
FM 312
|
|
|
|---|---|
| Location: | Wood County |
| Length: | 17.397 mi[14] (27.998 km) |
| Existed: | June 11, 1945[14]–present |
FM 313
|
|
|
|---|---|
| Location: | Cameron County |
| Length: | 1.749 mi[15] (2.815 km) |
| Existed: | May 23, 1951[15][16]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Farm to Market Road 313 is located entirely within the city of Brownsville in Cameron County. It runs from SH 4 to SH 48.
FM 313 was designated on May 23, 1951, on the current route. On June 30, 1995 the road was transferred to UR 313.
FM 313 (1945)
|
|
|
|---|---|
| Location: | Henderson County |
| Existed: | June 11, 1945[15]–December 3, 1948 |
The original FM 313 was designated on June 11, 1945, from US 175 near La Rue to half a mile northeast of New York. The road was extended to SH 31 near Brownsboro on October 25, 1947. FM 313 was cancelled on December 3, 1948 and became a portion of FM 314.
FM 314
|
|
|
|---|---|
| Location: | Van Zandt and Henderson counties |
| Length: | 29.336 mi[17] (47.212 km) |
| Existed: | June 11, 1945[17]–present |
FM 315
|
|
|
|---|---|
| Location: | Henderson, Anderson and Van Zandt counties |
| Length: | 44.253 mi[18] (71.218 km) |
| Existed: | June 11, 1945[18]–present |
FM 316
|
|
|
|---|---|
| Location: | Van Zandt and Henderson counties |
| Length: | 15.276 mi[19] (24.584 km) |
| Existed: | June 11, 1945[19]–present |
FM 317
|
|
|
|---|---|
| Location: | Henderson County |
| Length: | 18.080 mi[20] (29.097 km) |
| Existed: | June 11, 1945[20]–present |
FM 318
|
|
|
|---|---|
| Location: | Lavaca County |
| Length: | 15.919 mi[21] (25.619 km) |
| Existed: | May 23, 1951[21]–present |
FM 318 (1945)
|
|
|
|---|---|
| Location: | Henderson County |
| Existed: | June 11, 1945–October 29, 1948[21] |
The original FM 318 was designated on June 11, 1945 from Poyner north to Fincastle in Henderson County. FM 318 was cancelled on October 29, 1948 and combined with FM 315.
FM 319
|
|
|
|---|---|
| Location: | Anderson County |
| Length: | 8.986 mi[22] (14.462 km) |
| Existed: | June 11, 1945[22]–present |
FM 320
|
|
|
|---|---|
| Location: | Anderson County |
| Length: | 8.185 mi[23] (13.172 km) |
| Existed: | June 11, 1945[23]–present |
FM 321
|
|
|
|---|---|
| Location: | Anderson County |
| Length: | 31.017 mi[24] (49.917 km) |
| Existed: | June 11, 1945[24]–present |
FM 322
|
|
|
|---|---|
| Location: | Anderson County |
| Length: | 14.199 mi[25] (22.851 km) |
| Existed: | June 11, 1945[25]–present |
FM 323
|
|
|
|---|---|
| Location: | Anderson County |
| Length: | 15.938 mi[26] (25.650 km) |
| Existed: | June 11, 1945[26]–present |
FM 324
|
|
|
|---|---|
| Location: | Angelina County |
| Length: | 5.664 mi[27] (9.115 km) |
| Existed: | June 11, 1945[27]–present |
FM 325
|
|
|
|---|---|
| Location: | Angelina County |
| Length: | 3.541 mi[28] (5.699 km) |
| Existed: | June 11, 1945[28]–present |
FM 326
|
|
|
|---|---|
| Location: | Angelina County |
| Length: | 10.963 mi[29] (17.643 km) |
| Existed: | June 11, 1941[29]–present |
FM 327
|
|
|
|---|---|
| Location: | Bexar County |
| Length: | 2.345 mi[30] (3.774 km) |
| Existed: | March 3, 1981[30]–present |
Farm to Market Road 327 is located in Bexar County. It runs from Loop 1604 southwest via Elmendorf to Loop 1604.
FM 327 was designated on March 3, 1981, on the current route over a former routing of Loop 1604.
FM 327 (1945)
|
|
|
|---|---|
| Location: | Angelina County |
| Length: | 6.7 mi[30] (10.8 km) |
| Existed: | June 11, 1945–August 15, 1961[30] |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
The original FM 327 was designated on June 11, 1945, from US 69 in Pollok southwest 6.7 miles to SH 103 in Angelina County. FM 327 was cancelled on July 24, 1961; the section from US 69 to FM 1819 was transferred to SH 7; the section from FM 1819 to SH 103 was transferred to FM 1819.
FM 328
|
|
|
|---|---|
| Location: | Angelina County |
| Length: | 5.205 mi[31] (8.377 km) |
| Existed: | June 11, 1946[31]–present |
FM 329
|
|
|
|---|---|
| Location: | Ellis County |
| Length: | 0.364 mi[32] (0.586 km) |
| Existed: | May 6, 1964[32]–present |
Farm to Market Road 329 is located in Ellis County. It runs from I-35E south of Waxahachie east to US 77.
FM 329 was designated on May 6, 1964 on the current route.
FM 329 (1945)
|
|
|
|---|---|
| Location: | Angelina County |
| Length: | 4.0 mi[32] (6.4 km) |
| Existed: | June 11, 1945–October 28, 1960[32] |
The original FM 329 was designated on June 11, 1945, from Concord north 4 miles. FM 329 was cancelled on October 28, 1960 and removed from the highway system.
FM 330
|
|
|
|---|---|
| Location: | Sabine County |
| Length: | 7.429 mi[33] (11.956 km) |
| Existed: | June 11, 1945[33]–present |
FM 331
|
|
|
|---|---|
| Location: | Austin County |
| Length: | 11.685 mi[34] (18.805 km) |
| Existed: | June 16, 1945[34]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Farm to Market Road 331 is located in Austin County. It runs from Oil Field Road near Raccoon Bend to SH 36 north of Sealy. There is a brief concurrency with FM 529 near Burleigh.
FM 331 was designated on June 16, 1945, from SH 159 at Bellville to Burleigh. On October 31, 1958, the road was extended to SH 36 southeast of Peters. The final change came on April 15, 1970, when FM 331 was rerouted; the original route was transferred to FM 529, and a section from Burleigh to Raccoon Bend was added, replacing FM 2916.
FM 332
|
|
|
|---|---|
| Location: | Washington County |
| Length: | 7.573 mi[35] (12.188 km) |
| Existed: | July 9, 1945[35]–present |
Farm to Market Road 332 is located in Washington County. It runs from FM 389 southwest of Brenham to FM 2502 at Wesley.
FM 332 was designated on June 16, 1945, from SH 159 at Nelsonville to Welcome. On May 11, 1953, the road was extended to FM 389; the portion of this extension from FM 389 to the Austin County Line was formerly FM 1263. The final change was on January 1, 1959, when the Wesley-Nelsonville section was transferred to FM 2502.
FM 333
|
|
|
|---|---|
| Location: | Colorado County |
| Length: | 11.370 mi[36] (18.298 km) |
| Existed: | June 13, 1945[36]–present |
RM 334
|
|
|
|---|---|
| Location: | Kinney and Uvalde counties |
| Length: | 29.717 mi[37] (47.825 km) |
| Existed: | June 11, 1945[37]–present |
RM 335
|
|
|
|---|---|
| Location: | Edwards and Real counties |
| Length: | 28.962 mi[38] (46.610 km) |
| Existed: | June 11, 1945[38]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
RM 336
|
|
|
|---|---|
| Location: | Real County |
| Length: | 26.385 mi[39] (42.463 km) |
| Existed: | June 11, 1945[39]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
RM 337
|
|
|
|---|---|
| Location: | Real and Bandera counties |
| Length: | 56.101 mi[40] (90.286 km) |
| Existed: | June 11, 1945[40]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
FM 338
|
|
|
|---|---|
| Location: | Collingsworth County |
| Length: | 27.401 mi[41] (44.098 km) |
| Existed: | June 11, 1945[41]–present |
FM 339
|
|
|
|---|---|
| Location: | Hill and Limestone |
| Length: | 48.328 mi[42] (77.776 km) |
| Existed: | June 23, 1945[42]–present |
FM 340
|
|
|
|---|---|
| Location: | Lavaca County |
| Length: | 14.535 mi[43] (23.392 km) |
| Existed: | May 23, 1951[43]–present |
FM 340 (1945)
|
|
|
|---|---|
| Location: | Limestone County |
| Length: | 6.0 mi[43] (9.7 km) |
| Existed: | June 23, 1945–December 17, 1947[43] |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
The original FM 340 was designated on June 23, 1945 from SH 14, 3 miles south of Groesbeck to 2.5 miles south of Big Hill in Limestone County. FM 340 was cancelled on December 17, 1947 and combined with FM 147.
FM 341
|
|
|
|---|---|
| Location: | Limestone County |
| Length: | 3.075 mi[44] (4.949 km) |
| Existed: | June 23, 1945[44]–present |
FM 342
|
|
|
|---|---|
| Location: | McLennan and Limestone counties |
| Length: | 5.576 mi[45] (8.974 km) |
| Existed: | June 23, 1945[45]–present |
FM 343
|
|
|
|---|---|
| Location: | Cherokee and Nacogdoches counties |
| Length: | 37.437 mi[46] (60.249 km) |
| Existed: | June 11, 1945[46]–present |
FM 344
|
|
|
|---|---|
| Location: | Smith County |
| Length: | 18.126 mi[47] (29.171 km) |
| Existed: | June 11, 1945[47]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Farm to Market Road 344 is located in Smith County. It runs from SH 155 near Noonday to SH 110 near Troup.
FM 344 was designated on June 11, 1945, from Eureka (now part of Teaselville) to Bullard. On February 17, 1947, the road was extended east to SH 110. On December 17, 1952, the road was extended west to SH 155. The final change was on February 15, 1971, when the western terminus was relocated.
FM 345
|
|
|
|---|---|
| Location: | Smith County |
| Length: | 1.939 mi[48] (3.121 km) |
| Existed: | June 11, 1945[48]–present |
FM 346
|
|
|
|---|---|
| Location: | Cherokee and Smith counties |
| Length: | 28.760 mi[49] (46.285 km) |
| Existed: | June 11, 1945[49]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
FM 347
|
|
|
|---|---|
| Location: | Cherokee County |
| Length: | 14.643 mi[50] (23.566 km) |
| Existed: | June 11, 1945[50]–present |
FM 348
|
|
|
|---|---|
| Location: | Rusk and Panola counties |
| Length: | 8.608 mi[51] (13.853 km) |
| Existed: | June 11, 1945[51]–present |
FM 349
|
|
|
|---|---|
| Location: | Gregg County |
| Length: | 9.953 mi[52] (16.018 km) |
| Existed: | June 6, 1945[52]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
FM 350
|
|
|
|---|---|
| Location: | Polk County |
| Length: | 27.706 mi[53] (44.588 km) |
| Existed: | June 11, 1945[53]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
FM 351
|
|
|
|---|---|
| Location: | Bee County |
| Length: | 7.146 mi[54] (11.500 km) |
| Existed: | October 31, 1957[54]–present |
FM 351 (1945)
|
|
|
|---|---|
| Location: | Polk County |
| Existed: | June 11, 1945–December 13, 1956[54] |
The original FM 351 was designated on June 11, 1945 from US 190 near the Trinity River via Kickapoo to Onalaska. FM 351 was cancelled on December 13, 1956 and transferred to FM 356.
FM 352
|
|
|
|---|---|
| Location: | Polk County |
| Length: | 7.996 mi[55] (12.868 km) |
| Existed: | June 11, 1945[55]–present |
FM 353
|
|
|
|---|---|
| Location: | San Augustine County |
| Length: | 9.768 mi[56] (15.720 km) |
| Existed: | June 11, 1945[56]–present |
FM 354
|
|
|
|---|---|
| Location: | San Augustine County |
| Length: | 6.022 mi[57] (9.691 km) |
| Existed: | June 11, 1945[57]–present |
FM 355
|
|
|
|---|---|
| Location: | Trinity County |
| Length: | 14.003 mi[58] (22.536 km) |
| Existed: | June 14, 1945[58]–present |
FM 356
|
|
|
|---|---|
| Location: | Trinity and Polk counties |
| Length: | 20.144 mi[59] (32.419 km) |
| Existed: | June 14, 1946[59]–present |
Farm to Market Road 356 is located in Trinity and Polk counties. It runs from SH 94 at Trinity southeast and south to Lake Livingston.
FM 356 was designated on June 14, 1946 from Trinity southeast 5 miles. On November 23, 1948 the road was extended southeast to Sebastopol. On December 17, 1952 the road was extended southeast to a road intersection. On January 15, 1957 the road was extended to US 190 near the Trinity River, replacing FM 351. On April 15, 1970 a section of FM 356 from US 190 south 2.2 miles was transferred to FM 3186 and two underwater sections totaling 4.7 miles were cancelled. The final change was on June 27, 2003 when a segment of surplus right of way eroded by Lake Livingston (TxDOT no longer needed the segment) and a .064 mile section of FM 356 near the north shore of Lake Livingston were removed from the state highway system.
FM 357
|
|
|
|---|---|
| Location: | Houston, Trinity and Polk counties |
| Length: | 34.074 mi[60] (54.837 km) |
| Existed: | June 14, 1945[60]–present |
FM 358
|
|
|
|---|---|
| Location: | Houston and Trinity counties |
| Length: | 13.131 mi[61] (21.132 km) |
| Existed: | June 14, 1945[61]–present |
FM 359
|
|
|
|---|---|
| Location: | Fort Bend and Waller counties |
| Length: | 46.201 mi[62] (74.353 km) |
| Existed: | June 18, 1945[62]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Farm to Market Road 359 is located in Fort Bend and Waller counties. It runs from US 90A east of Richmond to US 290/SH 6 east of Hempstead.
FM 359 was designated on June 18, 1945, from US 59, 1 mile east of Richmond, northwest to the Waller County line and from Richmond south to Thompsons. The same day the road was extended northwest through Brookshire to SH 6 southeast of Hempstead. On September 26, 1945, the road was extended to US 290 at or near Hempstead. On August 1, 1947, the Thompsons-Richmond section was cancelled (it is now FM 762 and FM 2759). On December 15, 1982, the road was extended to the new location of US 290, bringing the highway to its final length.
FM 360
|
|
|
|---|---|
| Location: | Fort Bend County |
| Length: | 8.808 mi[63] (14.175 km) |
| Existed: | June 18, 1945[63]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Farm to Market Road 360 is located in Fort Bend County. It runs from SH 36 in Needville to US 59/Loop 540 near Beasley.
FM 360 was designated on June 18, 1945, from SH 36 in Needville to US 59. On March 26, 1953, a spur connection to SH 36 was added. This spur connection was transferred to FM 1236. The final change was on May 20, 2014, when FM 360 was extended to Loop 540.
FM 361
|
|
|
|---|---|
| Location: | Fort Bend County |
| Length: | 7.200 mi[64] (11.587 km) |
| Existed: | June 18, 1945[64]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Farm to Market Road 361 is located in Fort Bend County. It runs from FM 1994 in Long Point to SH 36 near Pleak.
FM 361 was designated on June 18, 1945, from SH 36 south of Rosenberg to Fairchilds. On March 18, 1947, the road was extended to Long Point.
FM 362
|
|
|
|---|---|
| Location: | Grimes and Waller counties |
| Length: | 41.162 mi[65] (66.244 km) |
| Existed: | June 18, 1945[65]–present |
Farm to Market Road 362 is located in Grimes and Waller counties. It runs from SH 105 east of Navasota south to FM 1488 at Fields Store and from FM 1488 near the Harris County line south via Waller to FM 359 in Brookshire.
FM 362 was designated on June 18, 1945, from US 290 at Prairie View northeast to Joseph. On October 8, 1945, the description was changed so that FM 362 ran from US 290 near Waller 10 miles south toward Brookshire. The road was extended south 4 miles on December 16, 1948, and north to FM 1098 on September 15, 1949, replacing FM 1473. On May 23, 1951, the road was extended south to FM 359 in Brookshire, and north to the Grimes County Line on January 16, 1953, creating a concurrency with FM 1488 and replacing a portion of FM 1098. On March 24, 1954, the road was extended north to SH 6 near Navasota, replacing FM 245 which ended 1.6 miles north of the Grimes County Line. On July 12, 1967, FM 362 was rerouted, replacing a portion of FM 2988; the old route of FM 362 was renumbered FM 2988.
FM 363
|
|
|
|---|---|
| Location: | Newton County |
| Length: | 15.262 mi[66] (24.562 km) |
| Existed: | June 13, 1945[66]–present |
<templatestyles src="Module:Hatnote/styles.css"></templatestyles>
Farm to Market Road 363 is located in Newton County. It runs from US 190 near Bon Wier through Bleakwood to US 96.
FM 363 was designated on June 13, 1945 from Bleakwood to US 190 near Bon Wier. On September 26, 1945 the road was extended to US 96, replacing State Highway 340.
FM 364
|
|
|
|---|---|
| Location: | Jefferson County |
| Length: | 11.695 mi[67] (18.821 km) |
| Existed: | June 18, 1945[68]–present |
FM 365
|
|
|
|---|---|
| Location: | Jefferson County |
| Length: | 6.290 mi[69] (10.123 km) |
| Existed: | June 18, 1945[70]–present |
FM 366
|
|
|
|---|---|
| Location: | Jefferson County |
| Length: | 8.042 mi[71] (12.942 km) |
FM 367
|
|
|
|---|---|
| Location: | Wichita County |
| Length: | 19.012 mi[72] (30.597 km) |
| Existed: | June 25, 1945[72]–present |
FM 368
|
|
|
|---|---|
| Location: | Wichita and Archer counties |
| Length: | 46.283 mi[73] (74.485 km) |
| Existed: | June 25, 1945[73]–present |
FM 369
| Farm to Market Road 369 | |
|---|---|
| Location: | Wichita County |
| Length: | 22.698 mi[74] (36.529 km) |
| Existed: | June 25, 1945[74]–present |
FM 370
|
|
|
|---|---|
| Location: | Wichita and Wilbarger counties |
| Length: | 10.854 mi[75] (17.468 km) |
| Existed: | June 25, 1945[75]–present |
FM 371
|
|
|
|---|---|
| Location: | Cooke County |
| Length: | 9.773 mi[76] (15.728 km) |
| Existed: | June 23, 1945[76]–present |
FM 372
| Farm to Market Road 372 | |
|---|---|
| Location: | Cooke County |
| Length: | 19.601 mi[77] (31.545 km) |
| Existed: | June 23, 1945[77]–present |
FM 373
| Farm to Market Road 373 | |
|---|---|
| Location: | Cooke and Montague counties |
| Length: | 29.839 mi[78] (48.021 km) |
| Existed: | June 23, 1945[78]–present |
Lua error in Module:Format_link at line 170: too many expensive function calls.
FM 374
| Farm to Market Road 374 | |
|---|---|
| Location: | Callahan and Eastland counties |
| Length: | 5.131 mi[79] (8.258 km) |
| Existed: | September 27, 1954[79]–present |
Lua error in Module:Format_link at line 170: too many expensive function calls.
Farm to Market Road 374 is located in Eastland and Callahan counties. It runs from SH 206 in Cross Plains to FM 569 in Pioneer.
FM 374 was designated on September 27, 1954, from FM 880 in Cross Plains east and south to SH 36 over a former routing of SH 36. The only change was on February 6, 1973, when the western terminus was redesignated as SH 206.
FM 374 (1945)
| Farm to Market Road 374 | |
|---|---|
| Location: | Archer County |
| Length: | 22.5 mi[79] (36.2 km) |
| Existed: | June 25, 1945–December 10, 1953[79] |
Lua error in Module:Format_link at line 170: too many expensive function calls.
The original FM 374 was designated on June 25, 1945, from SH 199 in Megargel to a point 6.6 miles northeast in Archer County. On May 23, 1951, FM 374 was extended northeast to SH 25 west of Archer City, replacing FM 1196. The highway was extended 2.6 miles south of Megargel on February 6, 1953. FM 374 was cancelled on December 10, 1953 and transferred to FM 210.
FM 375
| Farm to Market Road 375 | |
|---|---|
| Location: | Maverick County |
| Length: | 0.915 mi[80] (1.473 km) |
| Existed: | September 21, 1955[80]–present |
Farm to Market Road 375 is located in Maverick County. It runs from US 277 east of Eagle Pass south to FM 1201 southeast of Eagle Pass.
FM 375 was designated on September 21, 1955 on the current route.
FM 375 (1945)
| Farm to Market Road 375 | |
|---|---|
| Location: | Throckmorton County |
| Existed: | June 19, 1945–February 6, 1953 |
Lua error in Module:Format_link at line 170: too many expensive function calls.
The original FM 375 was designated on June 19, 1945 from Woodson to US 283 in Throckmorton County. FM 375 was cancelled on February 6, 1953 and transferred to FM 209.
FM 376
| Farm to Market Road 376 | |
|---|---|
| Location: | Ochiltree County |
| Length: | 9.210 mi[81] (14.822 km) |
| Existed: | June 11, 1945[81]–present |
FM 377
| Farm to Market Road 377 | |
|---|---|
| Location: | Ochiltree and Lipscomb counties |
| Length: | 15.292 mi[82] (24.610 km) |
| Existed: | June 11, 1945[82]–present |
FM 378
| Farm to Market Road 378 | |
|---|---|
| Location: | Briscoe, Floyd, and Crosby counties |
| Length: | 71.386 mi[83] (114.885 km) |
| Existed: | June 16, 1945[83]–present |
FM 379
| Farm to Market Road 379 | |
|---|---|
| Location: | Grimes County |
| Length: | 1.532 mi[84] (2.466 km) |
| Existed: | May 23, 1958[84]–present |
Farm to Market Road 379 is a designation that has been used three times. The current use is in Grimes County, from SH 105 in Navasota to Loop 508.
FM 379 was designated on May 23, 1958 from FM 1227 south of Navasota east to SH 6 (now Loop 508). On November 14, 1980 the road was rerouted over a section of FM 1227.
FM 379 (1945-1949)
| Farm to Market Road 379 | |
|---|---|
| Location: | Menard County |
| Existed: | June 20, 1945–July 21, 1949[84] |
Lua error in Module:Format_link at line 170: too many expensive function calls.
The first use of the FM 379 designation was from US 83 north of Menard to the McCulloch County line. FM 379 was cancelled on July 21, 1949 and combined with FM 42 (now US 190).
FM 379 (1951-1957)
| Farm to Market Road 379 | |
|---|---|
| Location: | Sterling, Tom Green, and Irion counties |
| Length: | 51.9 mi[84] (83.5 km) |
| Existed: | May 23, 1951–November 7, 1957[84] |
Lua error in Module:Format_link at line 170: too many expensive function calls. The second use of the FM 379 designation was on May 23, 1951, from US 87 in Sterling City south 1.5 miles in Sterling County. The road was extended southwest 5 miles on December 17, 1952, and another 2.5 miles southwest on October 29, 1953. On October 26, 1954, the road was extended southwest 35 miles into Tom Green and Irion counties to US 67 in Barnhart, replacing FM 2008. FM 379 was cancelled on November 7, 1957 and redesignated SH 163.
FM 380
| Farm to Market Road 380 | |
|---|---|
| Location: | Tom Green and Concho counties |
| Length: | 28.380 mi[85] (45.673 km) |
| Existed: | July 11, 1945[86]–present |
FM 381
| Farm to Market Road 381 | |
|---|---|
| Location: | Runnels and Concho counties |
| Length: | 22.649 mi[87] (36.450 km) |
| Existed: | June 11, 1945[87]–present |
FM 382
| Farm to Market Road 382 | |
|---|---|
| Location: | Taylor and Runnels counties |
| Length: | 36.066 mi[88] (58.043 km) |
| Existed: | June 12, 1945[88]–present |
FM 383
| Farm to Market Road 383 | |
|---|---|
| Location: | Runnels County |
| Length: | 16.993 mi[89] (27.348 km) |
| Existed: | June 12, 1945–present |
FM 384
| Farm to Market Road 384 | |
|---|---|
| Location: | Coke and Runnels counties |
| Length: | 14.130 mi[90] (22.740 km) |
| Existed: | June 12, 1945[90]–present |
RM 385
| Ranch to Market Road 385 | |
|---|---|
| Location: | Kimble County |
| Length: | 32.348 mi[91] (52.059 km) |
| Existed: | June 11, 1945[91]–present |
RM 386
| Ranch to Market Road 386 | |
|---|---|
| Location: | Mason County |
| Length: | 15.896 mi[92] (25.582 km) |
| Existed: | June 11, 1945[92]–present |
FM 387
| Farm to Market Road 387 | |
|---|---|
| Location: | Ellis County |
| Length: | 3.329 mi[93] (5.358 km) |
| Existed: | April 25, 1978[93]–present |
FM 387 (1945)
| Farm to Market Road 387 | |
|---|---|
| Location: | Sterling and Coke counties |
| Length: | 34.7 mi[93] (55.8 km) |
| Existed: | June 16, 1945–May 6, 1969[93] |
Lua error in Module:Format_link at line 170: too many expensive function calls.
The original FM 387 was designated on June 16, 1945, from US 87 at or near Sterling City northeast 12 miles (19 km) in Sterling County. The road was extended to Edith on September 9, 1947, and to Loop 229 in Robert Lee on July 22, 1949. On December 15, 1959, a spur connection from near Loop 229 to SH 208 was added. On January 3, 1961, the spur connection became part of FM 387, while the spur itself was transferred to Loop 229. On February 1, 1969, FM 387 was rerouted due to the construction of the Robert Lee Reservoir; the old route was redesignated as FM 1904. Four months later FM 387 was cancelled and transferred to SH 158.
FM 388
| Farm to Market Road 388 | |
|---|---|
| Location: | Tom Green County |
| Length: | 17.964 mi[94] (28.910 km) |
| Existed: | December 15, 1956[94]–present |
FM 388 (1945-1948)
| Farm to Market Road 388 | |
|---|---|
| Location: | Washington County |
| Existed: | June 11, 1945–December 16, 1948[94] |
Lua error in Module:Format_link at line 170: too many expensive function calls. The first use of the FM 388 designation was in Washington County, from SH 36 south of Brenham via Muellersville to the Austin County line. FM 388 was cancelled on December 16, 1948 and combined with FM 109.
FM 388 (1951-1955)
| Farm to Market Road 388 | |
|---|---|
| Location: | Denton County |
| Length: | 5.1 mi[94] (8.2 km) |
| Existed: | May 23, 1951–October 1, 1955[94] |
Lua error in Module:Format_link at line 170: too many expensive function calls. The second use of the FM 388 designation was in Denton County, from SH 24 south through Lloyd to the former location of SH 24. FM 388 was cancelled on October 1, 1955 and transferred to FM 720.
FM 389
| Farm to Market Road 389 | |
|---|---|
| Location: | Fayette, Austin and Washington counties |
| Length: | 20.479 mi[95] (32.958 km) |
| Existed: | June 11, 1945[95]–present |
Farm to Market Road 389 is located in Fayette, Austin and Washington counties. It runs from FM 954 via Shelby to BS 36-J in Brenham.
FM 389 was designated on June 11, 1945, from Brenham to Klump. On December 17, 1952, the road was extended to US 290 southwest of Burton and to SH 36 (now BS 36-J) in Brenham. On January 1, 1959, FM 389 was rerouted; the old route was transferred to FM 2502, while FM 389 was routed over the old route of FM 2502. The final change came on October 15, 1973, when the road was extended to FM 954, replacing FM 3281.
FM 390
| Farm to Market Road 390 | |
|---|---|
| Location: | Washington County |
| Length: | 29.574 mi[96] (47.595 km) |
| Existed: | June 11, 1945[96]–present |
Farm to Market Road 390, Farm Road 390, or FM 390, is a state highway in the U.S. state of Texas maintained by the Texas Department of Transportation (TxDOT). The road, located in northern Washington County, begins at U.S. Route 290 in Burton and intersects SH 36 near Gay Hill before terminating at SH 105 northeast of Brenham. The road has a spur route at Independence connecting to the ruins of the 19th Century campus of Baylor University and the University of Mary Hardin-Baylor. The road also passes through the former communities of Longpoint and William Penn.
FM 390 begins at US 290 in Burton and follows W. Washington Street northeastward to N. Main Street where it intersects Spur 125. FM 390 turns northwest along Main Street and then northeast along La Bahia Trail intersecting FM 1697 before leaving Burton. The route merges with FM 1948 moving southwest for less than half a mile before branching off to the northeast. The route intersects FM 2679 at Longpoint and then crosses under the Burlington Northern Santa Fe Railway at Gay Hill through a 10.5-foot (3.2 m) single lane underpass, before intersecting SH 36. At Independence, FM 390's short spur route branches off to Old Baylor Park before FM 390 crosses FM 50. From Independence, the route passes to the east intersecting FM 2621 before reaching William Penn. The route then intersects FM 1935 and then turns south toward its terminus at SH 105.[97][98]
FM 390 generally follows along a portion of the much older La Bahía Road from western Louisiana into southeast Texas used before European settlement. The road was extended by the Spanish to Goliad and used by American pioneers settling in Texas.[99]
The first portion of the modern road to join the state's highway system was the section in Independence from Old Baylor Park to the present FM 50 which, along with FM 50 south of that juncture, was first designated as SH 211 sometime between 1933[100] and 1936.[101] By 1939 that highway was decommissioned but reinstated in 1940.[102] SH 211 was replaced by FM 50 and State Highway Spur 197 along the present FM 390 at Independence in 1943.[102][103]
Two years before in Burton, State Highway Loop 125 was designated along the present Spur 125 and the portion of the present FM 390 between Spur 125 and US 290.[104] FM 390 was initially designated on June 11, 1945 from Loop 125 in Burton to SH 36 near Gay Hill.[96] On September 26, 1945, FM 390 was extended over Loop 125 to US 290,[96] and Loop 125 was shortened to its present spur.[104] On May 23, 1951, FM 390 was extended 4.0 miles (6.4 km) east of SH 36 and an additional 0.8 miles (1.3 km) the following year.[96] On October 26, 1954, the route was extended to FM 50 south of Independence and then from the junction of FM 50 and Spur 197 in Independence east to William Penn.[96] The route at Independence was realigned on March 13, 1958 creating the route's spur and eliminating the route's concurrency with FM 50 south of town and replacing Spur 197.[96][103] FM 390 was extended south of William Penn on November 5, 1971 to a portion of SH 90[96] that would be renumbered as SH 105 in 1973.[105][106]
In 1995, the Texas Legislature passed a law recognizing FM 390 as a scenic highway and directing TxDOT to erect route markers indicating the route number and the road's scenic status.[107] In response, TxDOT erected along the route a shields unique among the state's Farm to Market Roads with a distinctive brown background resembling the shields of the state's Recreational Roads.
- Major intersections
The entire route is in Washington County.
| Location | mi[97] | km | Destinations | Notes | |
|---|---|---|---|---|---|
| Burton | 0.0 | 0.0 | US 290 – Giddings, Brenham | Western terminus | |
| 0.7 | 1.13 | Spur 125 (North Main Street) | |||
| 1.0 | 1.6 | FM 1697 | |||
| | 3.5 | 5.6 | FM 1948 north – Quarry | Northwestern end of FM 1948 concurrency | |
| | 3.9 | 6.3 | FM 1948 south | Southeastern end of FM 1948 concurrency | |
| Longpoint | 7.3 | 11.7 | FM 2679 | ||
| | 11.7 | 18.8 | SH 36 – Caldwell, Brenham | ||
| Independence | 20.3 | 32.7 | FM Spur 390 (Old Baylor Road) | ||
| 20.6 | 33.2 | FM 50 – Clay | |||
| | 22.5 | 36.2 | FM 2621 – Sandy Hill | ||
| | 24.8 | 39.9 | FM 1935 | ||
| | 29.7 | 47.8 | SH 105 – Brenham, Navasota | Eastern terminus | |
1.000 mi = 1.609 km; 1.000 km = 0.621 mi
|
|||||
FM Spur 390
| Farm to Market Spur 390 | |
|---|---|
| Location: | Independence |
| Length: | 0.128 mi[96] (0.206 km) |
| Existed: | 1958–present[96] |
Farm to Market Spur 390 (FM Spur 390) is a short spur route of FM 390 at Independence that branches off of its parent route along Old Baylor Road to the west terminating at Old Baylor Park, the original location of Baylor University, chartered in 1845 by the Congress of the Republic of Texas and opened the following year,[108] and the University of Mary Hardin Baylor, formerly Baylor University's women's department. Both colleges relocated to their current campuses in Waco and Belton respectively in 1886.[109]
The spur was the northern terminus of SH 211 beginning between 1933[100] and 1936.[101] SH 211 was decommissioned by 1939, but was reinstated in 1940.[102] SH 211 was again decommissioned in 1942, and the spur became the western terminus of Spur 197.[103] SS 197 was incorporated into FM 390 in 1958.[96]
FM 391
| Farm to Market Road 391 | |
|---|---|
| Location: | Robertson County |
| Length: | 13.286 mi[110] (21.382 km) |
| Existed: | June 22, 1945[110]–present |
FM 392
| Farm to Market Road 392 | |
|---|---|
| Location: | Hardeman and Wilbarger County |
| Length: | 6.891 mi[111] (11.090 km) |
| Existed: | October 15, 1954–present |
FM 392 (1945)
| Farm to Market Road 392 | |
|---|---|
| Location: | Robertson County |
| Existed: | June 22, 1945[111]–May 15, 1954 |
Lua error in Module:Format_link at line 170: too many expensive function calls. The original FM 392 was designated on June 22, 1945 in two sections: one section ran from Bremond to Nesbitt and the other section ran from Franklin to US 79 at Owensville. The sections were connected on November 23, 1948. FM 392 was cancelled on May 15, 1954 and combined with FM 46.
FM 393
| Farm to Market Road 393 | |
|---|---|
| Location: | Dimmit and Zavala counties |
| Length: | 14.996 mi[112] (24.134 km) |
| Existed: | June 16, 1945[112]–present |
FM 394
| Farm to Market Road 394 | |
|---|---|
| Location: | Kerr County |
| Length: | 0.557 mi[113] (0.896 km) |
| Existed: | September 1, 1968[113]–present |
FM 394 (1945)
| Farm to Market Road 394 | |
|---|---|
| Location: | Zavala and Frio counties |
| Existed: | June 16, 1945–November 16, 1964 |
Lua error in Module:Format_link at line 170: too many expensive function calls. The original FM 394 was designated on June 16, 1945 from La Pryor to Batesville as a replacement of a portion of SH 76. On July 15, 1949 the road was extended east 2.3 miles. On February 21, 1950 the road was extended east 32.7 miles to US 81. On April 16, 1962 the road was extended southeast to County Road. The section from US 81 southeast 4.2 miles was cancelled on January 1, 1963; the remainder of FM 394 was cancelled on November 16, 1964 and transferred back to SH 76 (now US 57).
FM 395
| Farm to Market Road 395 | |
|---|---|
| Location: | Dimmit and Zavala counties |
| Length: | 10.639 mi[114] (17.122 km) |
| Existed: | June 16, 1945[114]–present |
FM 396
| Farm to Market Road 396 | |
|---|---|
| Location: | Hidalgo County |
| Length: | 4.632 mi[115] (7.454 km) |
| Existed: | July 1, 1966[116]–present |
Farm to Market Road 396 is located in Hidalgo County. It runs from BU 83-S south to 0.5 mile south of the intersection of FM 1016.
FM 396 was designated on July 1, 1966 from US 83 (now I-2), 1 mile east of FM 1016, north to Loop 374 (now BU 83-S). On June 30, 1995 the route was transferred to UR 396. On April 3, 2006, by district request, the road was extended south to connect to the proposed Anzalduas International Bridge.
FM 396 (1945)
| Farm to Market Road 396 | |
|---|---|
| Location: | Yoakum and Terry counties |
| Existed: | June 11, 1945–March 1, 1966 |
Lua error in Module:Format_link at line 170: too many expensive function calls. The original FM 396 was designated on June 11, 1945 from SH 214, 5 miles north of Denver City, east to Bennett. On July 20, 1948 the section from Wellman to the Yoakum County line was added, creating a gap. This gap was closed on May 23, 1951. FM 396 was cancelled on March 1, 1966 and combined with FM 213.
FM 397
| Farm to Market Road 397 | |
|---|---|
| Location: | Williamson County |
| Length: | 3.456 mi[117] (5.562 km) |
| Existed: | April 25, 1978[117]–present |
FM 397 (1945)
| Farm to Market Road 397 | |
|---|---|
| Location: | Garza County |
| Existed: | June 11, 1945–November 1, 1968 |
The original FM 397 was designated on June 11, 1945 from US 84 northwest of Post to Pleasant Valley. FM 397 was cancelled on November 1, 1968 and combined with FM 399.
FM 398
| Farm to Market Road 398 | |
|---|---|
| Location: | Collingsworth County |
| Length: | 1.074 mi[118] (1.728 km) |
| Existed: | May 28, 1982[118]–present |
FM 398 (1945)
| Farm to Market Road 398 | |
|---|---|
| Location: | Garza County |
| Existed: | June 11, 1945–November 1, 1968 |
The original FM 398 was designated on June 11, 1945 from US 380 west of Post south to Graham Chapel in Garza County. FM 398 was cancelled on November 1, 1968 and combined with FM 399.
FM 399
| Farm to Market Road 399 | |
|---|---|
| Location: | Garza County |
| Length: | 9.289 mi[119] (14.949 km) |
| Existed: | June 11, 1945[119]–present |
Farm to Market Road 399 is located in Garza County. It runs from Pleasant Valley to US 380, and from US 380 to FM 1313 at Graham.
FM 399 was designated on June 11, 1945 from US 380 west of Post north to Close City. On November 20, 1951 the road was extended north to US 84. On November 1, 1968 the US 380-FM 1313 section was added, replacing FM 397 and FM 398 and creating a concurrency with US 380.
References
- ↑ 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 3.0 3.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 5.0 5.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 6.0 6.1 6.2 6.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 7.0 7.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 8.0 8.1 8.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 10.0 10.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 11.0 11.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 12.0 12.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 13.0 13.1 13.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 14.0 14.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 15.0 15.1 15.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 17.0 17.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 18.0 18.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 19.0 19.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 20.0 20.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 21.0 21.1 21.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 22.0 22.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 23.0 23.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 24.0 24.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 25.0 25.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 26.0 26.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 27.0 27.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 28.0 28.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 29.0 29.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 30.0 30.1 30.2 30.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 31.0 31.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 32.0 32.1 32.2 32.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 33.0 33.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 34.0 34.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 35.0 35.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 36.0 36.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 37.0 37.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 38.0 38.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 39.0 39.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 40.0 40.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 41.0 41.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 42.0 42.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 43.0 43.1 43.2 43.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 44.0 44.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 45.0 45.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 46.0 46.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 47.0 47.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 48.0 48.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 49.0 49.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 50.0 50.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 51.0 51.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 52.0 52.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 53.0 53.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 54.0 54.1 54.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 55.0 55.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 56.0 56.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 57.0 57.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 58.0 58.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 59.0 59.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 60.0 60.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 61.0 61.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 62.0 62.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 63.0 63.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 64.0 64.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 65.0 65.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 66.0 66.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 72.0 72.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 73.0 73.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 74.0 74.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 75.0 75.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 76.0 76.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 77.0 77.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 78.0 78.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 79.0 79.1 79.2 79.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 80.0 80.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 81.0 81.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 82.0 82.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 83.0 83.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 84.0 84.1 84.2 84.3 84.4 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 87.0 87.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 88.0 88.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 90.0 90.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 91.0 91.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 92.0 92.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 93.0 93.1 93.2 93.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 94.0 94.1 94.2 94.3 94.4 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 95.0 95.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 96.00 96.01 96.02 96.03 96.04 96.05 96.06 96.07 96.08 96.09 96.10 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 97.0 97.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 100.0 100.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 101.0 101.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 102.0 102.1 102.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 103.0 103.1 103.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 104.0 104.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 110.0 110.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 111.0 111.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 112.0 112.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 113.0 113.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 114.0 114.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 117.0 117.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 118.0 118.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 119.0 119.1 Lua error in package.lua at line 80: module 'strict' not found.
