Airport apron
The airport apron is the area of an airport where aircraft are parked, unloaded or loaded, refueled, or boarded.[1] Although the use of the apron is covered by regulations, such as lighting on vehicles, it is typically more accessible to users than the runway or taxiway. However, the apron is not usually open to the general public and a license may be required to gain access.
The use of the apron may be controlled by the apron management service (apron control or apron advisory) to provide coordination between the users.
The apron is designated by the ICAO as not being part of the maneuvering area. All vehicles, aircraft and people using the apron are referred to as apron traffic.
Other terms
Tarmac
Many people in the general public and news media refer to the apron at airports as "the tarmac" despite the fact that most of these areas are often paved with concrete not tarmac, often referred to as PQ (Pavement Quality) concrete. The term "tarmac" was used during an early aircraft hijack episode in the Middle East. The reporter with a British accent reported that the aircraft was parked "on the tarmac" and it stuck as a descriptive area.[citation needed]
Ramp
In the United States, the word ramp is an older term for an area where pre-flight activities were done; an apron was any area for parking and maintenance. Passenger gates are the main feature of a terminal ramp. The word apron is the ICAO and FAA terminology (the word ramp is not), so the word ramp is not used with this meaning outside the US, Canada, Maldives, and the Philippines.
See also
References
- ↑ FAA Advisory Circular 120-57A – See page 2 for definition of Apron (Ramp)
External links
Media related to Lua error in package.lua at line 80: module 'strict' not found. at Wikimedia Commons- Challenges to airport ramp and runway debris control
